30-06 Fletch Weld Instant Glue .5 Oz.

Quick bonding agent bonds to variety of substrates with 3200 PSI strength, works great on vanes and feathers.

30-06 Insert Weld Insert Glue .5 Oz.

Black high-viscosity rubber toughened, great for carbon and aluminum shafts. Shock resistant .008" gap filler and 3700 PSI strength, military grade, max 90 second bond time temp rated 65 degrees F to +280 degrees F.

30-06 Tip Jam Thread Bond Non-permanent

Fills the negative space between the insert threads and point threads. Lightweight, odorless formula eliminates tips vibrating loose.

Aae Fast Set Gel 3g

Cyanoacrylate gel adhesive designed to be used with plastic, instantly bonds nocks and vanes permanently to aluminum and carbon shafts. Remove by cutting.

Aae Max Bond Glue .7 Oz.

Nock and vane glue with a special formula for AAE Plastifletch Max and Max Hunter vanes. Will also work on most other type vanes.

Aae Max Clean Arrow Cleaner 3 Oz.

Each capful dissolved in water will clean about 200 arrows. Max Clean will work on all types of arrow shafts. There is enough Max Clean to clean up to 500 shafts.

Aae Max Clean Arrow Wipes 10 Pk.

AAE's Max Clean Arrow Wipes are a quick and easy method of cleaning arrow shafts for proper fletching adhesion. No more spilling liquids or smelly chemicals in your house or shop when prepping arrow for new shaft or re-fletching projects. Max Clean Arrow...

Aae Max Impact Insert Glue .7 Oz.

Blended with rubber to increase its ability to withstand and absorb sudden high loads. Insert adhesive designed for high impact applications.

Aae Max Weld Primer Pen

Primer pen cleans the base of the vane for maximum adhesion. Designed for vanes that have a urethane base such as the AAE Max series.

Aae Two Part Epoxy

Two part epoxy for gluing nock and point inserts into aluminum shafts, designed for use with carbon and aluminum. Package design proportions amounts automatically, requires Twenty-four hours for full cure.

Bob Smith Ic-gen Glue 20 Gm.

IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE.

Bob Smith Insta Set Accelerator 8 Oz.

Speeds up the drying time on all cyanoacrylate glues. Allows glues to set in only 6-8 seconds.