Bow Medic L Bracket 1 Pr.

Adapts the Bow Medic Portable Bow Press for use on most split limb bows up to 6 degrees beyond parallel. Also works on solid limb bows.

Bow Medic Ultimate Limb Brackets

The Ultimate Limb Brackets allow any limb configuration to be pressed with the Bow Medic Press.

Bowmaster Split Limb L Bracket G2 Standard

The Split Limb Brackets work on most bows up to 6 degrees past parallel and fit large cams. Maximum cam width of 3/4".

Bowmaster Split Limb L Bracket G2 Wide

The Split Limb Brackets work on most bows up to 6 degrees past parallel and fit large cams. Maximum cam width of 1 1/8".

Last Chance Draw Board Ultimate Version

The all new LCA Draw Board is the perfect tool, adaptable to all Last Chance presses, for tuning your bow to perfection. Check your timing, draw length, cam lean and set your rest with more precision than ever. For use on both of the Ultimate presses.

Last Chance Draw Stop Finger

Draw stop fingers allow bows with limb stops to be pressed without removing the draw stop pegs. Sold individually.

Last Chance Finger Caps

Fully interchangeable with any Last Chance Press. Install by cutting the current pieces off of your fingers and then slide these new custom molded caps into place.

Last Chance Limb Adapters

Designed to assist in pressing beyond parallel limb bows. Adapters clip directly to the bow's limb tips. For use on split limb bows only.

Last Chance Mag Strip

The Mag Strip is a great organizational addition to bow presses and workbenches holding tools and accessories in place. The large magnetic surface attaches to any metal surface.

Last Chance Mini Xbow Adapter

The Mini Xbow Adapter is specifically made for pressing crossbows that are under 12” axle to axle. With this easy to use adapter you can press crossbows down to 5” axle to axle. This adapter will only fit the LCA Ultimate EZ, Ultimate EZ Deluxe and EZ...

Last Chance Ultra Lock Adapter

Adapter made for the 2016 Hoyt, UltraFlex Limb System. Fully adaptable to any Last Chance bow presses to safely work on 2016 Hoyt bows.

Last Chance Wheel Kit Floor Stand

Use the wheel kit to put your press on wheels and have the ability to move it anywhere in your shop with ease. This kit includes 4 wheel attachments and 4 thumb screws to lock each one into place inside your stand. Fits all Last Chance floor stands.